IntroductionCosmos GMPSolidity UtilitiesSandbox
InterchainTokenServiceInterchainTokenFactoryTokenManagerAxelarGateway AxelarGasServiceAxelarExecutableAxelarJS SDK
Bug Bounty
Crosschain Message FlowaxlUSDCSecurity OverviewInterchain Transaction DurationEVM Contract Governance

Query and recover GMP transactions

Occasionally, transactions can get “stuck” in the pipeline from a source to destination chain (e.g. due to one-off issues that arise with relayers that operate on top of the network).

The AxelarGMPRecoveryAPI module in the AxelarJS SDK can be used by your dApp to query the status of any General Message Passing (GMP) transaction (triggered by either callContract or callContractWithToken) on the gateway contract of a source chain and trigger a manual relay from source to destination if necessary. - The GMP status tracker on Axelarscan makes use of this feature.

Install the AxelarJS SDK module (AxelarGMPRecoveryAPI)

Install the AxelarJS SDK:

npm i @axelar-network/axelarjs-sdk

Instantiate the AxelarGMPRecoveryAPI module:

import {
  AxelarGMPRecoveryAPI,
  Environment,
} from "@axelar-network/axelarjs-sdk";

const sdk = new AxelarGMPRecoveryAPI({
  environment: Environment.TESTNET,
});

Query transaction status by txHash

Invoke queryTransactionStatus:

const txHash: string =
  "0xfb6fb85f11496ef58b088116cb611497e87e9c72ff0c9333aa21491e4cdd397a";
const txStatus: GMPStatusResponse = await sdk.queryTransactionStatus(txHash);

Possible status responses for txStatus are outlined below:

interface GMPStatusResponse {
  status: GMPStatus;
  gasPaidInfo?: GasPaidInfo;
  errors?: any;
  callData?: any;
}
enum GMPStatus {
  SRC_GATEWAY_CALLED = "source_gateway_called",
  DEST_GATEWAY_APPROVED = "destination_gateway_approved",
  DEST_EXECUTED = "destination_executed",
  DEST_EXECUTE_ERROR = "destination_execute_error",
  DEST_EXECUTING = "executing",
  UNKNOWN_ERROR = "unknown_error",
  CANNOT_FETCH_STATUS = "cannot_fetch_status"
}
interface GasPaidInfo {
  status: GasPaidStatus;
  details?: any;
}
enum GasPaidStatus {
  GAS_UNPAID = "gas_unpaid",
  GAS_PAID = "gas_paid",
  GAS_PAID_NOT_ENOUGH_GAS = "gas_paid_not_enough_gas",
  GAS_PAID_ENOUGH_GAS = "gas_paid_enough_gas",
}

Trigger manual relay of transaction through the Axelar network

The following method, once invoked, will:

  1. Query the current status of the transaction to be in one of the states above.
  2. Recover from source to destination if needed.
const sourceTxHash = "0x..";
const provider = new ethers.providers.JsonRpcProvider(
  "https://goerli.infura.io/v3/projectId"
);

// Optional
// By default, The sdk uses `window.ethereum` wallet as a sender wallet e.g. MetaMask.
// This option allows caller to pass `privateKey` or `provider` to the sdk directly
const senderOptions = { privateKey: "0x", provider };

const response = await sdk.manualRelayToDestChain(
  sourceTxHash,
  senderOptions /* can be skipped */
);

Possible response values are:

export interface ApproveGatewayResponse {
  success: boolean;
  error?: ApproveGatewayError | string;
  confirmTx?: AxelarTxResponse;
  createPendingTransferTx?: AxelarTxResponse;
  signCommandTx?: AxelarTxResponse;
  approveTx?: any;
}

If success == false in the response above, there are two options to remediate (below).

Execute manually OR increase gas payment

1. Execute manually

When invoking this method, you will manually execute (and pay for) the executable method on your specified contract on the destination chain of your cross-chain transaction.

const sourceTxHash = "0x..";
const provider = new ethers.providers.JsonRpcProvider(
  "https://goerli.infura.io/v3/projectId"
);

// Optional
// By default, The sdk uses `window.ethereum` wallet as a sender wallet e.g. MetaMask.
// This option allows caller to pass `privateKey` or `provider` to the sdk directly
const senderOptions = { privateKey: "0x", provider };

const response = await sdk.execute(
  sourceTxHash,
  senderOptions /* can be skipped */
);

Possible response values are:

{
    success: "success" | "failed",
    data: ethers.ContractReceipt | undefined,
    error: string | undefined
}

2. Increase gas payment

There are two different functions to increase gas payment depending on type of the token.

2.1 Native gas payment

Invoking this method will execute the addNativeGas method on the Gas Receiver contract on the source chain of your cross-chain transaction to increase the amount of the gas payment, in the source chain native token. The amount to be added is automatically calculated based on many factors e.g. token price of the destination chain, token price of the source chain, current gas price at the destination chain, etc. However, it can be overridden by specifying amount in the options.

import {
  AxelarGMPRecoveryAPI,
  Environment,
  AddGasOptions,
} from "@axelar-network/axelarjs-sdk";

// Optional
const options: AddGasOptions = {
  amount: "10000000", // Amount of gas to be added. If not specified, the sdk will calculate the amount automatically.
  refundAddress: "", // If not specified, the default value is the sender address.
  estimatedGasUsed: 700000, // An amount of gas to execute `executeWithToken` or `execute` function of the custom destination contract. If not specified, the default value is 700000.
  evmWalletDetails: { useWindowEthereum: true, privateKey: "0x" }, // A wallet to send an `addNativeGas` transaction. If not specified, the default value is { useWindowEthereum: true}.
};

const txHash: string = "0x...";
const { success, transaction, error } = await api.addNativeGas(
  EvmChain.AVALANCHE,
  txHash,
  options
);

if (success) {
  console.log("Added native gas tx:", transaction?.transactionHash);
} else {
  console.log("Cannot add native gas", error);
}

Possible response values are:

{
    success: "success" | "failed",
    data: ethers.ContractReceipt | undefined,
    error: string | undefined
}
2.2 ERC-20 Gas Payment

This is similar to native gas payment except using ERC-20 token for gas payment. However, the supported ERC-20 tokens are limited. See the list of supported tokens here: [Mainnet | Testnet]

import {
  AxelarGMPRecoveryAPI,
  Environment,
  AddGasOptions,
  EvmChain,
  GAS_RECEIVER,
} from "@axelar-network/axelarjs-sdk";
import { ethers } from "ethers";

// Optional
const options: AddGasOptions = {
  amount: "10000000", // The amount of gas to be added. If not specified, the sdk will calculate the amount to be paid.
  refundAddress: "", // The address to get refunded gas. If not specified, the default value is the tx sender address.
  estimatedGasUsed: 700000, // An amount of gas to execute `executeWithToken` or `execute` function of the custom destination contract. If not specified, the default value is 700000.
  evmWalletDetails: { useWindowEthereum: true, privateKey: "0x" }, // A wallet to send an `addNativeGas` transaction. If not specified, the default value is { useWindowEthereum: true}.
};

const environment = Environment.TESTNET; // Can be `Environment.TESTNET` or `Environment.MAINNET`
const api = new AxelarGMPRecoveryAPI({ environment });

// Approve gas token to the Gas Receiver contract
const gasToken = "0xGasTokenAddress";
const erc20 = new ethers.Contract(gasToken, erc20Abi, gasPayer);
await erc20
  .approve(GAS_RECEIVER[environment][EvmChain.AVALANCHE], amount)
  .then((tx) => tx.wait());

// Send `addGas` transaction
const { success, transaction, error } = await api.addGas(
  EvmChain.AVALANCHE,
  "0xSourceTxHash",
  gasToken,
  options
);

if (success) {
  console.log("Added gas tx:", transaction?.transactionHash);
} else {
  console.log("Cannot add gas", error);
}

Possible response values are:

{
    success: "success" | "failed",
    data: ethers.ContractReceipt | undefined,
    error: string | undefined
}
Edit this page
On this page